All LFO shapes are fully editable now. The end fade starts when a note off is received. When Start Fade is an immediate fade out, then it is ensured that the LFO will start at the defined start phase on note-off. This way you can do a pure note-off LFO.

Nom:mutools mulab
Format:Fichier D’archive
Système d’exploitation:Windows, Mac, Android, iOS
Licence:Usage Personnel Seulement
Taille:67.53 MBytes

All LFO shapes are fully editable now. The end fade starts when a note off is received. When Start Fade is an immediate fade out, then it is ensured that the LFO will start at the defined start phase on note-off. This way you can do a pure note-off LFO. When in Tempo Sync mode, setting the frequency via a dialog bar now also supports a "Bpc" unit suffix meaning Beats Per Cycle. This way the conversion to "Cpb" Cycles Per Beat is done for you.

New "Note Dispatcher" module. This module dispatches the incoming notes events to one of the outputs depending on the mode: Random: Whenever a note-on is received, a random output is selected. Round Robin: Whenever a note-on is received, the next output is selected. And when a note-on with Special Key is received, the output is reset to the first one. Keyed: Whenever a note-on with Special Key is received, the next output is selected. New One Pole Lowpass module.

Renamed the term "Session" to the more familiar term "Project". New Sinc sample interpolation algorithm. Sinc interpolation sounds much better when transposing samples which contains lots of high frequencies aka trebles. When working with many tracks and audio parts, scrolling, zooming and editing the composer is much faster now. Number MIDI inputs and outputs has been doubled from 8 to 16, resulting in up to possible output channels. Improved Improved control over the sample interpolation mode: Anywhere sample play properties are defined there now is an extra [Options] button.

By default all sample players use the global preference so interpolation mode can be easily changed for all sample players including all multi-sample zones that use the global preference. New preference "Auto Loop Recorded Sequences". New shortcuttable function: "Edit Tempo Changes" now is a shortcuttable context function. Legato function now works to the next note anyway, independent whether the next note is selected or not.

A rack's own note key names now have priority on the note key names of the first synth in that rack. Finetuned MuSynth UI layout. Improved time bar and time grid layout for when in real time mode hh:mm:ss. Parameter editors with only a label eg in MuSynth now have a "Edit Value" context menu. So the question "Delete audio file X? Pure Delay now has a samplerate-independent maximum delay of 2 seconds.

Increased the efficiency of several functions, e. Also loading projects could be a bit faster. Improved shortcut system: Less chance that a shortcut is not processed because of a UI focus mismatch. Automation editor now also supports inputting parameter values in their specific format eg " Hz" for a cutoff parameter automation.

Improved the sample playback engine when in backward or alternate loop mode so no double samples are played at the returning points. Slightly improved sound quality of some of the Multi-Form Oscillator transforms.

New "Scroll To Play Cursor" shortcut function. Sequence object display: If no sequence then right-click will also popup the relevant choice list. Sequence object display: Tooltip only displayed when name is not fully displayed. Creating the graphic overview data for an audio file is faster.

OVW file for an audio file. OVW file is moved too. New "Update To Modified Audio Files" function which will update the audio file project objects to any changes applied to the source file. When switched on, then when an audio file has been edited externally and you switch back to the project window then a question pops up whether to to update to the latest changes.

If this preference is switched off, you can still update to the latest changes using the new "Update To Modified Audio Files" function. When switching a project off, all used audio files are closed, which makes them available for external editing. When a project is switched on again, all used audio files are reopened. Export Tracks As Audio Files: When a main track did not contain parts but its sub-tracks did, the main track was not exported.

When loading a new preset file into the Multi-Point Envelope the editor window title was not updated. Note Mapper editor: "Input" and "Output" labels were not displayed right. Fixed an issue when editing numeric pitch-bend values.

Sequence editor: When inserting a note, the property panel shows the data for that note, but when undoing the insert, the property panel was not cleared. Sequence editor: Changing aftertouch and pitch-bend values via the property panel was not working correct.

MuSynth: Fixed a problem with the polarity of the amplifiers sustain level. MultiSampla editor: Pitchbend knob had a little vertical offset. Sequence editor: When changing the editor grid, the event property panel now immediately takes that into account. In rare specific cases editors could open with an improper size.

Fixed a sorting issue in the meta-parameter map table. Fixed a possible memory leak when quitting. Some parameter values were not displaying decimals while intended. When deleting the audio file used by an audio part, the graphic was still shown. Fixed a possible crash bug when reading MIDI files with long text meta-data. LAB Free v 6. You can now set exact parameter values by double-clicking a parameter value which pops up an input dialog.

You can now drop samples directly onto MuDrum pads, that will load them into that pad's MuSampla element 1. Improved Floating Windows Bar: The window buttons now toggle between show and hide.

And a right-click closes the window. Improved behavior when loading sessions with registered VST plugins of which the DLL has been moved to another location. Optimized speed for certain sequence functions especially noticeable for sequences with thousands or more events. Improved inputting of parameter values in the event list editor, logical selector, meta-parameter map editor, Modulation Monitor now also includes a text display that displays the modulation value.

Improved the way how the display string and default value is defined for the modular meta-parameters. It's simple now: The defaults are defined by the first parameter mapping for that meta-parameter. To control this, the meta-parameter map editor now supports pushing a mapping to the top.

Clicking the time bar to set a new play position now has instant response. Mixer strip modulation mode changed to multiplication. Fixed Fixed an issue with the tooltips while dragging objects around. Fixed an issue when feeding overloaded values in certain curve transformations. In some cases the browser was unintendedly changing the list position.

Undo-redo of editing an envelope point via a popup dialog was not working. Modular area: Lasso selecting multiple modules and dragging them could make only a single module to be dragged. These key names can also be imported and exported to a text file.

Sequence parts: New "Consolidate" function which renders the loop into a new straightforward sequence and deletes any unplayed events. Improved Increased the number of events that a VST can send to the host in a single process slice.

Session's Event Recording Setup: Grid editor field now also includes grid scrolling buttons. New preference "Scrollbar Size". Event Monitor now also has an event output, events are simply bypassed, but this way the Event Monitor is more usable in a rack. Audio Envelope Follower: Improved algorithm for converting the audio envelope into a modulation signal.

Much more accurate now. The level meter of a mixer strip of a rack now is draggable and represents the mixer strip module. Now each click previews it again.

While moving markers in composer, audio- and sequence-editor, then the current marker position is displayed in the info box. When saving a preset file using a file name that differs from the object name, the popup question alert now explicitly includes both these different names. File browsers: More file browsers now memorize their last location. Improved support for changing the samplerate or blocksize during a session. MuLab: Finetuned behavior when doing Audio Setup.

Previously the whole session was reloaded, including all plug-ins, which also caused editors to close etc. Now the session stays intact and only when the samplerate has changed or blocksize has increased then all plug-ins are updated.

Pasting a module into a deep modular editor using a keyboard shortcut pasted the module at the far bottom-right of the editor, which was not intended. Now the pasted module is positioned at the mouse position. Fixed an issue with the MUX Modular presets not showing the proper icon in the browser.



Il y a beaucoup de solutions à votre portée pour produire et enregistrer de la musique mais très peu d'alternatives gratuites sont aussi complètes que MULAB, un outil apparemment très simple, mais avec un grand potentiel. Caractéristiques Séquenceur audio avec un moteur de qualité. Création et composition MIDI. Enregistrement et édition audio multi-piste. Collection native d'instruments virtuels comme MuSynth ou MuDrum entre autres, un échantillonneur ou des effets. Architecture par modules qui permet de créer des synthétiseurs et des effets.


MuTools MuLab



Télécharger Mutools Mulab



MuTools MuLab